PureLine35

Plenum box shorter than front rail, centrally positioned, with one horizontal spigot

New design possibilities with white, grey and black air control blades

Schräge Luftströmung

Vertikale Luftströmung

PureLine35

Diskret slitsdiffusor som smälter in perfekt i undertakssystem

Mycket hög komfort tack vare lägre ljudeffektnivåer och förbättrad temperatur- och hastighetsreduktion
Mer energieffektiv tack vare lägre tryckförluster
Enkel och snabb installation - inga verktyg krävs för att montera diffusorytan
Nya användningsområden - t.ex. luftridåer för att skydda färskvarudiskar
Hög flexibilitet tack vare många varianter

Tillvalsutrustning och tillbehör

Attraktivt utseende tack vare strängpressade aluminiumprofiler med anodiserad yta eller pulverlackering
Diffusorytan kan placeras symmetriskt eller asymmetriskt
Plenumbox med foder
Gavlar, gavelvinklar, hörnprofiler
Olika utseende tack vare val av svarta, grå eller vita luftkontrollelement

Teknisk information

Order example: PL35-1-S-PF-HS/1200x1200x98/1

Number of slots	1
System	Supply air
Variant	With fixed connection between plenum box and face plate
Plenum box variant	Standard plenum box with horizontal connection
Nominal size	Front rail 1200 mm, plenum box 1200 mm, spigot diameter 98 mm
No. of spigots	1
Damper unit for volume flow rate balancing	Without
Lip seal	Without
Lining	Without
Position of plenum box	Central position
Air pattern	Alternating horizontal
Extended border	Without
End pieces	Without
Surface	Anodised, E6-C-0, natural colour
Colour of air control blades	black

Order example: PL35-2-S-SF-HS/1200x1050x123/2-D-LS-L-LE/AS/B00/EA/P1-RAL 9010/W

Number of slots	2
System	Supply air
Variant	With releasable connection between plenum box and front rail
Plenum box variant	Standard plenum box
Nominal size	Front rail 1200 mm, plenum box 1050 mm, spigot diameter 123 mm
No. of spigots	2
Damper unit for volume flow rate balancing	With
Lip seal	With
Lining	With
Position of plenum box	Left side
Air pattern	Alternating angled
Extended border	With
End pieces	With end angle
Surface	Powder-coated RAL 9010, pure white, gloss level approx. 50 %
Colour of air control blades	white

Order example: PL35-2-E-DF/1200/V/B00/EP/P1-RAL 9006/G

Number of slots	2
System	Extract air
Variant	Diffuser face with extended border and spring clip
Plenum box variant	No plenum box
Nominal size	Diffuser face 1200 mm
No. of spigots	Without
Damper unit for volume flow rate balancing	Without
Lip seal	Without
Lining	Without
Position of plenum box	No plenum box
Air pattern	Vertical
Extended border	With extended border
End pieces	With end plate
Surface	Powder-coated RAL 9006, white aluminium, gloss level approx. 30 %
Colour of air control blades	grey

Order example: PL35-1- -CS/100x100x90

Number of slots	1
Variant	Corner section
Dimensions	Leg dimension E: 100 mm Leg dimension F: 100 mm Angle: 90°
Extended border	Without
Surface	Anodised, E6-C-0, natural colour
Colour of air control blades	Black, similar to RAL 9005

Order example: PL35-2- -CS/150x250x45/B00/P1-RAL 9016/W

Number of slots	2
Variant	Corner section
Dimensions	Leg dimension E: 150 mm Leg dimension F: 250 mm Angle: 45°
Extended border	With
Surface	Powder-coated RAL 9016, gloss level 70%
Colour of air control blades	White, similar to RAL 9010